Klepar MatevžSheet metal · roofing
SLEN

Services 02

Flashings and parapet cappings

We make flashings with different joints and in different sheet metals, to suit your wishes and the building. A parapet capping protects the wall and the insulation from the weather.

+386 40 557 784 Enquire about flashings
A PREFA sheet-metal eaves flashing above larch cladding

How we make them

Joint, metal and colour to suit the building

  1. 1Flat-lock or diagonal flat-lock joints
  2. 2No visible fixings
  3. 3The metal can move freely, without stress or rippling
  4. 4For example PREFA Stucco in P10 anthracite

Example · July 2025

A house with Siberian larch cladding

PREFA sheet-metal edges with flat-lock joints, against Siberian larch cladding. Clean lines and tight joints.

  • The house with a balcony, larch cladding and sheet-metal edges
  • The eaves flashing above the ground floor
  • The house from the side of the outside stairs
  • The balcony and the eaves with a sheet-metal flashing

Example

Parapet cappings on a flat roof

PREFA Stucco in P10 anthracite, with diagonal flat-lock joints and no visible fixings. We adapted it to the architecture of the building.

  • The corner of the parapet capping below the fence
  • The parapet capping along the fence
  • Diagonal flat-lock joints at the parapet corner
  • The parapet next to the outside steps

Before you call

What metal are the flashings made of?

We work with many materials, including PREFA. We choose the joint and the metal with you, to suit the building.

Will the fixings show?

We can make parapet cappings with no visible fixings, as in the example above.

How do I get a quote?

Call us on +386 40 557 784 for a site visit and a quote, or send your project to info@klepar-matevz.si.

Need flashings or parapet cappings?

+386 40 557 784 Send an enquiry

Next: metal façades and roofs

Call us Enquiry